If you sell electric cars, you need chargers on site. Not one by the front door for show. A well planned layout that keeps stock topped up, has demonstrators ready for test drives and gives customers a reason to enjoy visiting you.
We install workplace and commercial charging for businesses across London, the Home Counties and Yorkshire, and dealerships are a job we like. The sites are busy, the cars are valuable and the people running them know exactly what they want. This guide covers what a dealership needs, how many chargers to fit, how the power works and what happens on the day.
Why do dealerships need their own chargers?
Because electric cars don’t sit on a forecourt for free. The battery drains slowly while a car waits for a buyer, and a customer who turns up for a test drive and finds a car at ten percent isn’t going to wait around. They’ll leave, and some won’t come back.
Chargers fix that. Every car you want to show is ready when the customer is. Your sales team can move stock without checking range first. Your prep team can top a car up before handover, so the new owner drives away with a full battery and a good first memory of you.
There’s a smaller benefit too. Chargers you can see from the road tell passing drivers you’re serious about electric. For a dealer selling electric models, that counts before anyone’s walked through the door.
What jobs do the chargers do?
Four, usually. Most sites end up needing a mix.
Stock. New and used electric cars waiting on the forecourt or in the lot. These sit for days, so slow steady charging is fine.
Demonstrators. Cars that have to be ready at a set time and charged back up between drives.
Handover. A bay near the workshop or delivery area where a car gets a quick top up before the customer arrives.
Visitors and service customers. People browsing, waiting for an MOT or dropping a car off for the day.
Plenty of dealers add a fifth, which is staff charging. If your team drives electric, they’ll use the chargers whether you plan for it or not. Better to decide the rules at the start. Our workplace EV charger installation service covers single and multi bay systems, and it’s the starting point for most dealerships we speak to.
How many chargers does a showroom need?
Count the electric cars you’d want on charge at the same time on a busy day. Then add some for growth. That’s your number.
A small independent with six electric cars on the lot needs far fewer bays than a franchised dealer with a full forecourt. But the smart move is the same for both. Run the cabling for where you expect to be in two years, and fit the chargers you need today. Cable and groundwork are the expensive, messy part. Adding a charger later onto cable that’s already in the ground takes very little time.
Don’t forget visitors. A few bays set aside for customers and workshop drop offs is a separate job from stock charging, and it’s the one dealers remember last.
What power supply does a dealership need?
Most dealerships have a bigger supply than a house, and plenty have three phase power, which suits a row of chargers nicely. The real question is how much of it is spare.
Think about what your building already uses. Lighting, air conditioning, workshop equipment, ramps, compressors. A busy service department pulls a lot of power, and chargers add to that. So we look at the incoming supply, the main board and how the building uses electricity through a normal day. Then we tell you how many chargers it can run at full speed, and how many more it can carry with load management.
If the supply is tight, you’ve got choices. Share what’s available between chargers. Install in stages. Or look at an upgrade, which means a conversation with the network operator and can take longer, so we raise it early. Our guide to commercial EV charger installation goes through the supply side in more detail.
What is load management?
It’s a way for a group of chargers to share a limited supply. The system watches what the building is using. When demand is high, the chargers slow down. When it drops, they speed up again.
For a showroom, this solves two problems at once. It stops the chargers tripping the main supply when the workshop is flat out. And it lets you fit more bays than the supply could carry at full power. Cars parked on the forecourt for days don’t need fast charging anyway, so sharing power between them costs you nothing. The demonstrator that needs to be ready by two o’clock can be given priority.
Without load management, a site with a modest supply might run two or three chargers. With it, the same site can run a whole row. We explain the same idea for a single house in our post on why a home EV charger charges slowly, and a row of bays works on exactly the same principle.
Which chargers suit a dealership?
For stock and demonstrators, a smart 7kW charger is the workhorse. It’s quick enough to fill a car between uses, and it’s far cheaper to install in numbers than faster units. For a handover bay, where a car needs a fast top up before a customer arrives, a quicker unit can be useful, as long as the supply allows it.
Then there’s tethered or untethered. A tethered charger has its cable attached, which is quick for staff and hard to lose. An untethered one takes the cable the driver brings, which suits visitor bays where every car is different. Many dealers fit both.
Our chargers page shows the range we fit. If a cheaper option does the job, we’ll say so.
Where should chargers go on a forecourt?
Near where cars already park, and out of the way of cars that need to move in a hurry.
Wall mounted chargers work where cars park against a building or boundary wall. Post mounted units suit open forecourts, where there’s nothing to fix to. Some dealers keep a charging zone by the workshop for handovers and a separate row on the stock lot.
Think about how your team parks cars. A showroom that rotates stock all day needs cable reach that works nose in and tail in. Leave room to walk around a charging car without stepping over a lead. And keep chargers clear of delivery lorries and car transporters, which swing wide and don’t forgive anything in the way. A walk round the site with our surveyor settles most of this in about an hour.
Can customers use the chargers?
Yes, and you decide how. Some dealers offer free charging to visitors as a courtesy. Others want to recover the cost of the electricity. Both are possible.
If the chargers are for your own stock and staff only, a simple smart unit with an app or key fob does the job. If customers will use them, you’ll want to control who can plug in and, if you choose, take payment. We can specify chargers with access control to match. Tell us how you’d like it to work at the survey, because adding payment later is harder than planning for it now.
How do you protect chargers on a busy forecourt?
Plan for knocks. A forecourt has cars coming and going all day, and chargers get clipped, dragged on and tampered with if nobody thought about it.
Mount units at a sensible height and set them back from the path of moving cars. Add bollards or wheel stops where a bumper could reach one. Keep leads off the ground when they’re not in use. And choose chargers that can lock or limit access, so a passer by can’t help themselves to your electricity.
Ask your insurer about the installation too. We’re NICEIC registered and fully insured, and we leave you with the certificates they’re likely to ask for.
How does installation work?
Simply. A call, a survey, a fixed price, the install and a handover.
We begin with a conversation about what your site does and what you want the chargers to do. Then comes a free survey, in person for most dealerships. The surveyor looks at the supply, the cable routes, the bay positions and any groundwork. After that you get a fixed price quote, so you know what you’re paying before work starts.
We plan the installation around your trading hours where we can, so showroom customers don’t notice much. When it’s finished, we test every charger, issue the certificates and show your team how to use them. You can read more about how we work on our services page and about page.
Will installation disrupt the showroom?
Not much, if it’s planned well. The time follows the number of chargers, the cable runs and any groundwork, so a small site is quicker than a big forecourt.
Most of the noisy work, like trenching and drilling, happens outside. We can schedule it for quieter days or for before you open. Cars can be moved out of the working area while the rest of the lot carries on. We’d rather agree a plan with you up front than turn up and get in the way of a busy Saturday. If your site is large or complicated, we’ll tell you at the survey how long to expect.
How much does it cost?
It follows the number of chargers, the distance from the supply to the bays, and whether any groundwork or a supply upgrade is needed. A row of chargers beside the main board costs a good deal less than the same row at the far end of a big lot.
So we don’t quote a figure from a phone call. After the survey, you get one fixed price for the job. For the general picture of what drives cost, our EV charger installation cost guide explains the main factors, and the same ideas apply to a bigger site.
On VAT, many businesses can reclaim it on installations. Our post on VAT on EV charger installation explains how it works, and your accountant will confirm what applies to you.
Should we install everything at once?
Not always. Many dealers lay the cabling for the full plan at the start and fit chargers in stages as electric stock grows. That keeps the disruption to one job and spreads the cost.
Staging also teaches you something. After a few weeks you’ll know which bays get used most, how staff handle the cars and whether customers want more visitor charging. The next batch can then be adjusted. If your manufacturer sets a minimum number of chargers as part of franchise standards, send us the requirements and we’ll build the layout around them.
What happens after the chargers go in?
You get a handover, the certificates and a number to call. We test every unit, walk your team through them and leave you the paperwork. If something isn’t right, ring us on 0203 0519196 or use our contact page.
It also helps to give your team a simple routine. Someone checks cars are plugged in at close of day. Someone unplugs the demonstrator before a drive. Someone answers customer questions about charging. A little structure stops cars sitting flat because nobody remembered. Smart chargers help here too. The app shows which units are in use, and you can set schedules so stock charges overnight at cheaper rates.
Can you look at chargers we already have?
Yes. If you’ve got chargers on site that aren’t coping, tell us what’s wrong. We install and service chargers, and our guide to finding a certified EV charger installer explains what to look for in whoever you choose.
A lot of showrooms built their charging a few years ago for one or two cars. Today’s stock needs more, and the old units were often never linked to load management. A survey shows what can stay and what should go.
Do dealerships need a different installer from homes?
You need one who does commercial work as well as domestic. The credentials are the same, NICEIC registration and OZEV approval. The planning isn’t. Supply assessment, load management and multi bay layouts matter far more on a forecourt than on a driveway.
We do both. Our home EV charger installation work covers houses, and our workplace and commercial work covers sites like yours. If you’re wondering whether a regular electrician could do it, our guide on whether you can install an EV charger yourself explains why a qualified installer matters.
Do used car dealers need chargers too?
Yes, and often sooner than they expect. Used electric cars come in on part exchange, and each one arrives with whatever charge the last owner left. A car you can’t start, show or drive to a valuation is a car that’s costing you space.
A couple of chargers at the back of the lot turn that around. Staff can plug a car in the moment it arrives, check it’s healthy and have it ready for the first buyer who asks. For independents, this is often the cheapest way to start selling electric with confidence, since you don’t need a full row on day one.
Can chargers help you sell more electric cars?
They help. A buyer who’s never owned an electric car is nervous about charging, and a dealer who can show them a charger, plug a car in and explain how it works takes that worry away. It turns a vague fear into something they’ve seen with their own eyes.
Some dealers go a step further. They show the customer what a home charger looks like and talk through how it fits their house, then point them to our home EV charger installation page for the next step. It’s a simple way to make the sale feel complete, since the customer leaves knowing how the car will be charged at home as well as on your forecourt.
What should we ask before choosing an installer?
Ask whether they’ve done commercial sites as well as homes, whether they’ll survey your supply before quoting, and whether the price is fixed. Ask how they handle load management on a multi bay layout, and what certificates you’ll get when the job is finished.
Ask, too, how they plan around trading hours. A good installer will have an answer ready. We’re NICEIC registered, OZEV approved and fully insured, and we give you a fixed price after the survey, so those questions are easy for us to answer.
Where do you work?
Across London, Surrey, Kent, Essex, Hertfordshire, Berkshire, Buckinghamshire, East and West Sussex, and West and South Yorkshire. Dealerships tend to cluster along main roads and on trade parks, and we’ve covered a lot of those areas. In London, our pages for Hillingdon, Croydon and Brent show the kind of local work we do.
Our office is at Dorset House, 845 Harrow Road, London NW10 5NH. If your dealership is in our area, send us your site details and we’ll arrange a survey.
How do we get started?
Tell us about your site. Roughly how many electric cars you hold, how many you expect to hold in a year or two, whether you have three phase power and where you’d like the chargers. Photos of the forecourt and the main board help. If you don’t know the answers, don’t worry, the survey fills the gaps.
Then we arrange a free survey and send you a fixed price, with no obligation. Use our contact page or call 0203 0519196.
EV Charging for Car Dealerships: FAQs
Electric cars lose charge while they wait for a buyer, and a flat demonstrator can cost you a sale. Chargers keep stock, test drive cars and handovers ready, and give visitors somewhere to plug in.
Count the electric cars you’d want on charge at once on a busy day, then allow for growth. Run the cabling for the full plan and fit the chargers in stages.
Many dealerships have more supply than a house, often three phase. A survey shows how much is spare and how many chargers it can run at full speed.
It lets chargers share a limited supply. They slow down when the building is busy and speed up when it isn’t, so you can fit more bays than the supply could carry at full power.
A smart 7kW charger works well for stock and demonstrators. A quicker unit can suit handover bays where the supply allows it.
Close to where cars already park, clear of moving traffic, with cable reach that suits how you park stock. Wall units suit buildings and post units suit open lots.
Yes. Chargers can be set up with access control, and you choose whether charging is free or paid.
Mount them at a sensible height, set them back from moving cars, add bollards or wheel stops and choose units that can lock or limit access.
A call, a free survey, a fixed price quote, installation and handover. We test every charger and issue the certificates.
We plan around your trading hours and keep the working area small. Noisy work can go on quieter days or before opening.
The price follows the number of chargers, the cable distance and any groundwork or supply upgrade. You get one fixed price after the survey.
London, the Home Counties and Yorkshire. Our office is at Dorset House, 845 Harrow Road, London NW10 5NH.
Talk to Us About Charging for Your Dealership
Tell us about your showroom and we’ll arrange a free survey and a fixed price. Use our contact page or call 0203 0519196.

