Replacing or Upgrading an Old EV Charger

Most of the time you don’t have to replace an old home charger. If it’s working, charging your car at a sensible speed and sitting safely on the wall, it can stay. There’s no rule that says a charger from a few years ago has to come off.

But chargers do wear out, cars change, and some older units are slow, dumb or missing a safety feature that newer ones have built in. This post helps you work out which side of that line yours is on. We’ll cover when a swap makes sense, what gets checked, what the new rules mean for older chargers, and how we handle it. We install home chargers across London and the Home Counties.

“Do you have to replace an old EV charger?”

No. The UK’s smart charge point rules started on 30 June 2022. They say a new home charger has to be able to charge smartly, which means it should default to off peak hours, add a small random delay to the start and end of a session so the grid isn’t hit all at once, and keep its data secure. Chargers sold before that date are exempt, and nothing in the rules tells you to rip an older one out.

So an older charger can stay for as long as it works and you’re happy with it. The reverse is also true. A unit that doesn’t meet the rules can’t be newly installed now, which is part of why some old models are no longer on offer.

What the rules don’t cover is whether the charger is any good for you. A unit can be perfectly legal and still be slow, awkward or cut off from the smart tariff you want. That’s the real question behind most swaps.

Signs it might be time

The most common reason is simple. It’s stopped working, or it works only some of the time. If it keeps tripping the power, throws error lights, or the charge stops halfway for no reason, it needs a close look. Sometimes the fault is in the wiring or the protection behind it, and not in the charger at all, so don’t assume a new box will fix it.

Physical damage is another sign. A cracked case, a cable that’s split or has been run over, a plug that’s loose or burnt, or water getting in are all reasons to stop using it and call someone. A damaged charger isn’t something to keep going with.

Then there’s the app. A lot of smart chargers rely on a company’s servers, and if the app is no longer updated, or the company has changed hands, the smart side can stop working. If your charger now behaves like a plain socket, you’ve lost the thing you paid extra for.

Speed matters too, but be careful. If your car charges slowly, the charger might be the cause, but so could the car’s own limit, the supply to the house, a cable that’s too long or too thin, or a setting. Our guide on why your EV charger is charging slowly goes through seven possible causes, so check those before you spend anything.

Is it the charger, or the car?

A lot of people upgrade to a faster charger and see no change, because the car was the limit. Every EV has an onboard charger that decides how much AC power it will take. Many cars take 7kW and some take less, so a 22kW box won’t speed up a car that stops at 7kW.

It also depends on what your house can supply. Most homes have a single phase supply, and that caps what a charger can do. Single phase versus three phase explains the difference, and 3kW, 7kW and 22kW chargers compares what each one gives you. On a 7kW charger you can expect to add around 25 to 30 miles of range per hour of charging, which is enough to fill most batteries overnight.

Your car’s manual or the manufacturer’s website will tell you the maximum AC charging rate. If it says 7.4kW, a 7kW charger uses all of it. If it says 3.7kW, a faster charger gives you nothing extra, and the money is better spent on something else, like a smarter unit or a better cable run. A quick check before you buy saves you paying for speed the car can’t use.

If you’re still on an older 3kW charger, the jump to 7kW is the upgrade that’s easiest to feel. The same goes if you’ve changed to a car with a bigger battery. Overnight on a slow charger might have been fine for a small battery and not for a large one.

What have you got on the wall?

Before anyone can say whether to keep it or swap it, you need to know what it is. Most chargers have a label on the side or underneath. It shows the make, the model, the rating in kilowatts or amps, and a serial number. Take a photo of it. Take another of the whole unit, the cable and the plug end.

Older units tend to fall into a few groups. Some are early 3kW chargers, often untethered, that were fitted when cars had small batteries. Some are early smart chargers that depended on an app and a company’s servers. Some are plain 7kW units with no smart features at all. Each one has a different story. A slow 3kW unit is a speed question. An early smart unit might be a software question. A plain 7kW unit might only need a smart upgrade if you want a time of use tariff.

Knowing which group yours belongs in shortens the conversation a lot, and it means the survey can start from facts and not guesses.

The bit behind the wall

When a charger is swapped, the electrician doesn’t just unscrew one box and screw on another. The things behind it matter more than the charger itself.

The first is protection. A home charger needs the right protection in the consumer unit, and modern installs use specific types of protection suited to EV charging. If your old charger was fitted some years ago, the protection may not match what’s used today.

The second is earthing. On many UK homes the neutral and earth are combined in the supply. If that combined conductor were to break, metalwork connected to the car could become live. For this reason, rules in BS 7671 call for protection against it, and a charger either has detection built in or needs a separate earth rod or protection device. Many modern chargers have it built in, and an older one might not. Ask whoever fits your charger how they’ve dealt with it.

The third is the cable run and the consumer unit itself. If the cable is the right size and in good condition, the swap can be quick. If not, there’s extra work. The post on whether you need a new consumer unit for an EV charger answers one of the most common questions, and preparing your home’s electrical system shows what we check first.

What a swap involves

On the day, the power to the charger is isolated, the old unit comes off, and the circuit is checked. If everything behind it is right, the new charger goes on the same spot, it’s connected and tested, and it’s set up for your car. If the circuit needs changes, those are done first.

A standard home install takes roughly two to four hours. A swap with the circuit already in good shape can be quicker, and one that needs more work will take longer. How long EV charger installation takes walks through the steps.

Ask what happens to the old unit too. If it still works, there may be a second use for it somewhere else, such as a garage or a second car. If it doesn’t, it should be taken away and recycled.

Will you be without a charger for long?

Not for long. Most swaps are finished in a few hours, and the charger is live and tested by the time we leave. Plan around it though. If you need a full battery on the day, charge up beforehand or use a public charger. If we find the consumer unit needs upgrading, the job can take most of a day, and we’ll tell you at the survey so it doesn’t come as a surprise.

If your car is plugged in when we arrive, we’ll ask you to unplug it, because the power to the charger has to be switched off.

What happens to the old one?

If the old charger still works, it doesn’t have to go in the bin. Some people keep it for a second car or a different parking spot, as long as an electrician sets it up with the right circuit and protection there. If it’s damaged or has stopped working, it should be taken away and recycled, which is part of what we do at the end of a swap.

Choosing the new one

Start with how you use the car. A charger for a home with a driveway and one car is a different choice from one for a household with two EVs sharing a supply.

Smart features come next. If you’re on a time of use electricity tariff, the charger should be able to start and stop on schedule. Some smart tariffs only work with chargers from the supplier’s approved list, so check that before you buy. Our guide on how EV chargers work explains what smart charging does.

Next, tethered or untethered. A tethered charger has the cable fixed to the unit, so you just pick it up and plug in. An untethered one is a socket, and you bring your own cable. EV charging cables explained covers the difference, and you should settle that before you choose a unit.

If you have solar panels, or plan to, think about solar compatibility. Some chargers can use spare solar power, and some need extra equipment to do it. Solar powered EV charging goes through what’s involved.

And think about the next car. A charger that fits every make is safer than one tied to a single brand. You can browse the chargers we offer, and the post on whether a home charger is worth it helps if you’re weighing up the cost of a change.

Cost, and what changes the price

A swap is usually cheaper than a first install, because the cable and the protection are often already there. But it depends on what we find. A short run in good condition is a small job. A consumer unit that needs upgrading, a cable that’s the wrong size or a new run to a different spot adds to it.

The charger itself is the other part. A basic unit costs less than a smart one with solar features. Our pages on EV charger installation cost and how much EV charger installation costs in the UK explain what makes up a quote, and VAT on EV charger installation covers the tax rules.

We give you a fixed price after the survey, so you know the total before any work starts.

Questions to ask the installer

Ask what they’ll check behind the charger, not just what they’ll fit. Ask how the earthing and protection are handled, and whether the charger has its own protection or relies on the consumer unit. Ask what the price includes, and what happens if they find something unexpected. Ask how long it will take, and whether the old unit will be taken away.

Ask about the charger too. Which smart tariffs does it work with? Does it need Wi-Fi, or does it have its own mobile signal? What’s the warranty, and who do you call if the app stops working? An installer who answers those plainly has probably done this many times.

Can you swap it yourself?

We’d say no. A charger sits on its own circuit with its own protection, earthing and testing, and getting any of that wrong is a safety risk that can also affect your insurance. Our guide to installing an EV charger yourself explains the rules, and how to find a certified EV charger installer tells you what to look for in someone who does it for you.

Moving house, or taking the charger with you

Some people want to take their charger to a new home. It can be done, but the new place has its own supply, its own earthing and its own cable run, and all of that has to be checked and set up again. A charger doesn’t become safe simply because it was safe in the last house. If you’re moving, it’s often easier to look at what the new home needs first and then decide whether to take the old unit or fit a new one.

How it works with EV Install Pro

It’s three steps. Give us your car registration, compare chargers, and we get in touch to book a survey and give you a fixed price. You can browse the chargers, read about home EV charger installation, and ask for a quote on the contact page. The FAQs cover the usual questions.

“Where do we install home chargers?”

We install across London and the Home Counties. In north London that includes Barnet, Enfield, Haringey, Camden and Watford. In east London we cover Hackney, Tower Hamlets, Waltham Forest, Barking and Dagenham and Havering.

In south London we install in Croydon, Sutton, Bromley, Bexley, Greenwich and Wandsworth. In west London we cover Ealing, Brent, Hammersmith and Fulham, Richmond upon Thames and Westminster.

Quick Answers

Replacing or Upgrading an Old EV Charger: FAQs

Do you have to replace an old EV charger?

No. The UK smart charge point rules began on 30 June 2022 and cover chargers sold after that date. Chargers sold before it are exempt, and nothing requires an older one to be removed. It can stay as long as it works and is safe.

When should an old home EV charger be replaced?

Replace it if it’s damaged, keeps tripping, charges slowly because of its own limits, or has lost its smart features. A cracked case, a split cable or a burnt plug means stop using it and call an electrician. A plain fault is sometimes in the wiring behind it, so check that first.

Will a faster charger make my car charge faster?

Only if the car and the supply can use it. Every EV has an onboard charger that limits how much AC power it takes, and many cars stop at 7kW. A 22kW unit won’t speed those up.

Is it worth upgrading from a 3kW to a 7kW charger?

If your car accepts 7kW and your home has a suitable supply, yes. A 7kW charger adds around 25 to 30 miles of range per hour, enough to fill most batteries overnight. A 3kW unit takes more than twice as long.

What do the smart charge point rules mean for older chargers?

New home chargers must be able to charge smartly, default to off peak hours, add a short random delay and keep their data secure. Older chargers sold before 30 June 2022 are exempt. A unit that doesn’t meet the rules can’t be newly installed now.

Can you move your EV charger to a new home?

It can be done, but the new home has its own supply, earthing and cable run. All of that has to be checked and set up again. Many people look at what the new home needs first and then decide whether to take the old unit or fit a new one.

Do you need a new consumer unit to replace an EV charger?

Not always. If the existing protection and cable suit the new charger, the swap can be quick. If the protection is out of date or the unit has no space, a new consumer unit may be needed. The survey tells you which.

How long does it take to replace a home EV charger?

A standard home install takes roughly two to four hours. A swap on a circuit that’s already in good shape can be quicker. If the consumer unit needs upgrading it can take most of a day.

How much does it cost to replace an EV charger?

It depends on the new charger and what the circuit needs. A swap is often cheaper than a first install because the cable and protection are already there. We give a fixed price after the survey.

Is it safe to replace an EV charger yourself?

We’d advise against it. A charger needs its own circuit with the right protection, earthing and testing. Getting it wrong is a safety risk and can affect your insurance, so use a certified installer.

What is PEN fault protection on an EV charger?

On many UK homes the neutral and earth share one conductor. If that conductor breaks, metalwork connected to the car could become live. BS 7671 calls for protection, either built into the charger or from a separate device or earth rod. Ask your installer how it’s handled.

Where does EV Install Pro replace home chargers?

We work across London and the Home Counties, including Barnet, Croydon, Ealing, Hackney, Wandsworth and Watford. Give us your car registration, compare chargers, and we get in touch to book a survey and give you a fixed price.

Thinking about changing your charger?

Tell us what’s on your wall now and what you drive, and we’ll tell you whether to keep it or swap it. Use our contact page or browse the chargers first.

2 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

EV Install Pro provides professional EV charger installation services for homes and businesses across London and the South East. 

Work Hours

© 2026 EV Install Pro. All Rights Reserved.