Volec Pulse vs EVEC Home Charger vs Ohme Home Pro: Which One Should You Buy?

If you want one answer, here it is. Most homes should buy the Volec Pulse at £899 fully installed. Buy the Ohme Home Pro at £999 if you’re on a tariff with cheap overnight rates and want the charger to work out the cheap window for you. Buy the EVEC Home Charger at £995 if you want a lead that stays attached to the unit and a charger that’s ready for solar.

All three are OZEV approved, all three are fitted by our own engineers, and the prices include standard installation. You get one fixed price in writing after the survey. What follows is how we’d choose between them if we were standing on your drive.

“What’s the difference between the Volec Pulse, EVEC and Ohme Home Pro?”

The difference is in how each charger handles three things: the cable, your electricity supply, and when it decides to charge.

The Volec Pulse is socketed. There’s no cable attached to the unit, so you plug your own Type 2 cable in. Its power is adjustable from 16A up to 48A, which means it can be set to whatever your panel can safely spare. It’s rated IP66, so it sits happily on an outside wall, and it’s solar aware.

The EVEC Home Charger comes with a 5m lead fitted. Its power is adjustable between 3.7kW and 7.4kW, and it’s solar ready.

The Ohme Home Pro also has a 5m lead fitted, runs on its own 4G connection and follows your electricity tariff. It’s the one built around charging at the cheapest time.

That’s the short version. The rest of this guide goes through what those differences mean in a real house.

“Which one is cheapest?”

The Volec Pulse is the cheapest at £899. The EVEC Home Charger is £995, and the Ohme Home Pro is £999. Every price includes the charger, a standard cable run, testing and your certificate.

The gap between cheapest and dearest is £100. Over the years you’ll own an EV, that’s a small amount, so don’t pick purely on price. Pick on the thing you’ll notice every day, which is how you plug the car in and when the charger decides to run.

Longer cable routes and consumer unit work are listed as separate lines on your quote, so the price you’re given after the survey is the price you pay. Our EV charger installation cost page explains what moves a quote up or down.

“Why do we recommend the Volec Pulse for most homes?”

Because it fits the widest range of houses and costs the least. We lead with it for four reasons.

The first is the adjustable power. Most chargers run at one fixed speed. If your fuse board can’t spare that much, the installer has to compromise or upgrade something. With the Volec you choose the current that suits your panel, and most owners set it once during the install and never touch it again. The range is also there if your house changes later, say when a heat pump arrives on the same board.

The second is the IP66 rating. That’s a weatherproof rating you can rely on for a front wall, a garage a long way from the meter or a driveway that gets all the rain going.

The third is automatic load management. The charger keeps an eye on the home’s total draw so the car doesn’t push you over the limit when the oven and the shower are running.

The fourth is the socketed design. If a second EV joins the household with a different cable, or you swap cars in two years, nothing on the wall changes.

The fitted price includes up to 15m of cable run from your consumer unit, protection, commissioning, app pairing and a walkthrough, plus the notification and the compliance certificate. A typical install takes 3 to 4 hours and the unit carries a 3 year warranty. There’s a free remote survey and panel check before you commit. Everything is on our Volec Pulse installation page.

“When is the EVEC Home Charger the better choice?”

When you want a lead that stays attached, and you want the option of running the car from your own solar panels. It’s a good unit even without panels, but the solar side is what it’s built around.

Solar owners tend to have the same pattern. The panels produce the most on sunny days, often while the house is empty, and the surplus goes back to the grid at a low export rate. Pushing that surplus into a car battery is usually better value to you than exporting it. The EVEC is solar ready, so it can run from that spare generation without a separate controller bolted on.

Its power is adjustable from 3.7kW to 7.4kW, which helps when the board is tight. The 5m lead is already attached, so you never carry a cable or forget it in the boot. That suits a one car household where the car always parks in the same spot.

At £995 it costs £96 more than the Volec. For a house with panels and a single EV, that’s easy to justify. For a house with two cars or an awkward parking layout, the socketed Volec gives more flexibility. You can read the detail on our EVEC Home Charger page.

“When is the Ohme Home Pro the right one?”

When your electricity tariff has a cheap overnight window and you don’t want to think about it. That’s the Ohme’s whole reason to exist. It follows your tariff, so the car charges when the unit price is lowest and finishes by the time you need to leave.

It has its own 4G connection too. A lot of chargers rely on home WiFi, and anyone who’s had a router drop out at midnight knows why that matters. If your charger sits in a garage or on a far wall where the signal is weak, an independent connection is a clear advantage.

It comes with a 5m lead fitted, and it has dynamic load balancing, which means it adjusts its own draw so the house never trips your main fuse. A busy home with electric heating, an induction hob or a shower running when the car is plugged in gets the most from that.

At £999 it’s the dearest of the three, and it earns the extra when the tariff is doing the heavy lifting. If you’re not on a time of use tariff, you won’t use what you’ve paid for. Our post on EV chargers and Economy 7 meters explains how cheap rate windows work with a home charger.

“Do I need a tethered or a socketed charger?”

If you have one car and it always parks in the same place, a charger with a lead attached is the easiest to live with. You pull the cable out, plug it in and put it back. There’s nothing to carry.

If you might have two EVs, or you swap cars every few years, a socketed unit like the Volec lets each driver bring a cable that fits. It also keeps the wall tidy, because there’s no cable hanging down when nobody is charging.

Cable length matters more than people expect. Measure from where the charger will sit to the car’s charging port with the car parked in its usual spot, then add some slack. Ports are on different parts of different cars, so a cable that suits your neighbour’s car might not reach yours. Our guide to EV charging cables explained covers types and lengths.

“Which charger is best if I have solar panels?”

The Volec Pulse and the EVEC Home Charger both suit solar homes, and which one you pick comes down to the rest of the house.

The Volec Pulse watches your solar production so more of each charge comes from your own roof, and it costs £96 less. It also lets you set the power to what your board can spare, which matters when you’ve added panels and perhaps a battery to an older fuse board.

The EVEC is solar ready and keeps its lead attached. It’s the neater choice for a one car household that wants no cables to manage.

The Ohme can work in a solar home too, but its strength is tariffs, not panels. If your savings come mostly from your panels, start with the Volec or the EVEC.

“Which charger is best for two electric cars?”

The Volec Pulse. Two cars means two cables, possibly two different ones, and a socketed charger is built for that. Each driver plugs in their own lead and the charger doesn’t care which car it is.

The load management helps here too. When two cars charge one after the other, or the house is busy, the charger keeps the total draw within what your supply can handle. And because you can set the power from 16A to 48A, you can match it to the board rather than guess.

A charger with a lead attached still works for two cars, but only one of them reaches the cable comfortably. It’s workable if both cars park in the same place and you swap them over. It’s less comfortable if they sit on opposite sides of the drive.

“Do all three charge at the same speed?”

For most homes, yes, near enough. A 7kW class charger adds around 25 to 30 miles of range an hour and fills most cars overnight. Most UK houses run on a single phase supply, and that sets the ceiling.

Your car sets a limit too. Every EV has its own onboard charger, and that decides the maximum AC power it will take. A car that only accepts 3.6kW won’t charge faster because the wall unit could deliver more. If a car charges slower than you expect, our post on why a home EV charger charges slowly goes through the seven most common reasons.

So when you compare these three, don’t hunt for the fastest one. They’re close. Look for the one that fits your cable setup, your tariff and your panel.

“Does a smart charger matter?”

Yes, and all three are smart. A smart charger lets you schedule sessions from an app and charge when electricity is cheapest, which for most households means overnight.

The Volec and EVEC give you scheduling and app control. The Ohme goes a step further by following your tariff and choosing the cheap window itself. If you’re happy to set a schedule once and leave it, any of the three will do. If you’d rather not touch it at all, the Ohme is the one that takes the decision away from you.

“Will the charger work in winter?”

Yes. All three are made for outdoor and garage use, and the Volec’s IP66 rating is there for exactly that. What changes in winter is the car, not the charger. A cold battery takes charge more slowly and uses more energy keeping itself warm, so sessions can take longer.

Scheduling helps. Setting the charge to finish shortly before you leave means the battery is warm when it matters. Our guide to charging an EV at home in winter has more.

“What does the installation include?”

The price you’re quoted covers the charger, a standard cable run from the consumer unit, the protective devices, testing, commissioning and your certificate. Our engineers walk you through the app before they leave.

We survey first. For the Volec that starts with a free remote survey and panel check, and we measure the route, test the wiring and check the consumer unit. That’s how we can give you one fixed price in writing. If the board needs work or the run is longer than standard, you see those as separate lines before anything begins. Nothing is added on the day.

A standard job usually takes a few hours. The figure on our homepage is 2 to 4 hours, and most jobs fall inside it. Once you confirm, we turn most installs around inside 7 days.

“Do I need a new consumer unit?”

Only if the one you have can’t take another circuit safely. A charger needs a dedicated circuit with the right protection, and some older boards are full or lack it. We check the board during the survey so there are no surprises on the day. If it’s fine, it stays. If it needs replacing, that’s a separate line on your quote.

Because we check first, the price we give you holds. That’s the main reason we survey every home before quoting, even when the charger is simple.

“Can I fit a charger myself, or use another electrician?”

A charger runs at high load for hours at a time, so the standard of the wiring matters more than it does for a cooker or a shower. It’s a job for a registered installer. Our posts on who should fit your EV charger and whether you can install an EV charger yourself explain why in more detail.

Our engineers are NICEIC registered, the chargers are OZEV approved, and you get the certificate when the job is done.

“What if I already own a charger or want a different model?”

We can fit it. We install Zappi, Easee, Pod Point, Wallbox, Ohme, Andersen and the Tesla Wall Connector as well as the three on this page. Tell us the model and we’ll confirm the details and give you a fixed price after the survey. The Andersen Quartz page covers one of the premium options.

If the charger you have is old or in the wrong place, read about replacing or upgrading an old EV charger or moving an EV charger. Once the charger is in, EV charger maintenance explains the little it needs.

“How should I decide between the three?”

Answer these in order, and stop at the first one that applies.

Are you on a tariff with a cheap overnight window and want it handled for you? Choose the Ohme Home Pro.

Do you have solar panels and one car, and want a lead that stays on the unit? Choose the EVEC Home Charger.

Is it anything else? Two cars, an older board, a front wall exposed to weather, or you simply want the lowest price? Choose the Volec Pulse.

Most households land on the Volec Pulse, which is why it’s our top pick. If you’re torn, book a survey. We’ll look at your board, your parking and your tariff and tell you which one fits. Our home EV charger installation page explains the whole process from quote to handover.

Quick Answers

Volec Pulse vs EVEC vs Ohme Home Pro: FAQs

For most homes it’s the Volec Pulse at £899 fully installed. It’s the cheapest, its power adjusts to suit your board and it works for one car or two. The Ohme Home Pro suits tariff following, and the EVEC suits solar homes that want a lead attached.

The Volec Pulse is £899, the EVEC Home Charger is £995 and the Ohme Home Pro is £999. Each price includes the charger, a standard cable run, testing and your certificate. Longer routes and consumer unit work are separate lines on your fixed quote.

A tethered charger has a cable attached to the unit, and a socketed one takes your own Type 2 cable. The EVEC and the Ohme come with a 5m lead fitted. The Volec Pulse is socketed, which suits households with two cars.

The Volec Pulse and the EVEC both suit solar homes. The Volec watches your solar production and is £96 cheaper, and the EVEC is solar ready with a lead attached. Pick the Volec if you also want adjustable power or have two cars.

The Volec Pulse. Its socketed design lets each driver use their own cable, and its automatic load management keeps the home’s total draw in check. You can set the power from 16A to 48A to suit the board.

It can be if you’re on a time of use tariff, because it follows the tariff and picks the cheap window for you. It also has its own 4G connection. If you aren’t on a cheap rate tariff, the Volec Pulse gives you more for less.

For most homes they’re close. A 7kW class charger adds around 25 to 30 miles of range an hour, and your single phase supply and your car’s onboard charger set the real limit. A bigger number on the box won’t speed up a car that can’t accept it.

It has an IP66 rating, which means it’s built for outdoor use. That suits a front wall, a driveway or a garage far from the meter.

A standard job takes a few hours, and 2 to 4 hours is typical. The Volec Pulse usually takes 3 to 4 hours. We turn most installs around within 7 days of your booking.

Only if your current one lacks spare capacity or the right protection. We check during the survey, and if a replacement is needed it appears as a separate line on your fixed quote before any work starts.

Yes. We fit Zappi, Easee, Pod Point, Wallbox, Ohme, Andersen and the Tesla Wall Connector as well as the three on this page. Tell us the model and we’ll give you a fixed price after the survey.

Yes. Our engineers are NICEIC registered, the chargers we fit are OZEV approved and you receive a certificate when the work is done.

Get a Fixed Price for Your Home

Tell us your postcode, your car and where you park, and we’ll recommend the right charger and send one fixed price in writing after a survey. Call us on 0203 0519196 or request a free quote. We cover London, the Home Counties and Yorkshire.

Leave a Reply

Your email address will not be published. Required fields are marked *

EV Install Pro provides professional EV charger installation services for homes and businesses across London and the South East. 

Work Hours

© 2026 EV Install Pro. All Rights Reserved.