Best Home EV Chargers UK (2027 Guide)

For most UK homes with off-street parking, a smart charger set to around 7.4kW is the right choice. It adds roughly 25 to 30 miles of range per hour, fills most cars overnight and costs between £799 and £1,200 fully installed. Our top pick for most homes is the Volec Pulse at £899. Its power adjusts from 16A to 48A to match what your panel can spare, it is rated IP66 for outdoor use and it follows your solar production. The EVEC Home Charger (£995) and the Ohme Home Pro (£999) suit more specific cases, which we cover below. Prices are as of November 2026.

The best charger is the one that matches your house, your car and your electricity supply, not the one with the biggest number on the box. A 22kW unit does nothing for a car that accepts 7kW, and a basic unit with no smart features wastes the cheap overnight rates most UK tariffs now offer. This guide goes through the choice home by home, so you can see which charger fits yours.

Which Home EV Charger Is Best for Your Home?

The quickest way to choose is to start with the home, not the brand. The table below matches the chargers on our shop to the situations we see most often on survey visits across London, the Home Counties and Yorkshire.

Your situationBest fitWhy it fitsPrice fully installed (Nov 2026)
Most homes, first EV, standard supplyVolec PulseAdjustable 16A to 48A output, IP66 outdoor rating, load management, lowest price of the three£899
Solar panels on the roofVolec Pulse or EVECThe Volec watches your solar production, and the EVEC has a solar eco mode that charges from surplus generation£899 or £995
Time-of-use tariff, or a supply that may be upgraded laterOhme Home ProDynamic load balancing, 4G, app control, listed as 22kW capable£999
Two EVs on one drive, or older panel with limited spare capacityVolec PulseSocketed, so each car brings its own Type 2 cable, and the power can be set to what the panel can safely spare£899
Terraced house, charger far from the fuse boardVolec PulseWeatherproof for a front wall, and the price includes up to 15m of cable run from the consumer unit£899

All three are OZEV-approved, fitted by our own engineers and priced with standard installation included. Every charger we install is Type 2, which is the plug standard on virtually every new EV sold in the UK, so all of them will plug into your car whatever badge is on the bonnet.

If you want a side-by-side view of every model we install, our Compare EV Chargers tool on the homepage lays them out in one table. The rest of this guide explains the reasoning behind the table so you can make the call yourself.

How Much Power Does a Home EV Charger Need?

A 7.4kW charger is enough for nearly every UK home. It draws about 32 amps, adds around 25 to 30 miles of range every hour and usually completes a full overnight charge in 6 to 8 hours. That covers the daily mileage of almost any driver with time to spare.

Home chargers come in three broad power levels. A standard 3-pin plug, often called a granny charger, delivers about 2.3kW. That works as an emergency top-up, but it takes more than a full day to refill a large battery and it is a poor idea to run a car on a domestic socket for long hours. A 7.4kW wallbox is the standard home option. A 22kW charger needs a three-phase supply, which most houses do not have.

Charger powerTypical home useRange added per hour (approx.)Supply needed
2.3kW (3-pin)Emergency top-up onlyAbout 7 to 8 milesStandard socket
7.4kWStandard home wallboxAbout 25 to 30 milesSingle-phase, 32A circuit
22kWRare at home, common at workplacesSet by the car’s onboard chargerThree-phase

One limit surprises many buyers. Your car has an onboard charger that sets the maximum speed it can accept from AC power. Some cars accept only 3.6kW, and for those a bigger wallbox will not speed charging up at all. A 7.4kW charger is still the sensible pick for a car like that, because it future-proofs you for your next vehicle, but paying extra for anything above it buys you nothing today.

What Is a Smart EV Charger and Do You Need One?

A smart charger connects to WiFi or 4G, lets you schedule charging from an app and can respond to your electricity tariff. All new home chargers sold in the UK must be smart under the smart charge point regulations, so the choice is how smart, not whether.

The most useful smart feature is scheduling. Many UK energy suppliers offer cheaper electricity overnight, and a smart charger lets the car wait until the cheap window opens before it starts drawing power. Our guide to fitting an EV charger on an Economy 7 meter covers how to line the charger up with an off-peak meter.

The second feature is app control. You can start, stop and check a session from your phone, see how much energy each charge used and set a charge limit so the battery stops at a level you choose. The Volec Pulse is controlled from its app, where you can also change its power. The Ohme Home Pro adds a 4G connection, which is useful if your WiFi signal does not reach the driveway.

Tariff syncing goes one step beyond scheduling. Instead of you picking a time, the charger reads your tariff and charges when the price is lowest. The Ohme Home Pro is built around that idea.

Volec Pulse: Our Top Pick for Most Homes

The Volec Pulse is a smart home charger at £899 fully installed. You can set its power anywhere from 16A to 48A, it is rated IP66 for outdoor use and it watches your solar production so more of your charge comes from sunlight. It is the lowest-priced of the three chargers on this page, and it is the one we recommend for homes with two EVs or for older panels where you still want the fastest safe charge.

The adjustable power is what sets it apart. Most chargers are fixed at one speed, and if your panel cannot spare that much, the installer has to compromise or upgrade something. The Volec lets you pick the current that suits your panel, either in the app or by asking your electrician to set it. Most owners set it once during installation and never touch it again, and the range is there if your home changes later, for example when a heat pump arrives on the same panel.

The IP66 rating means you can mount it outside in any weather, which suits front walls, driveways and garages far from the main box. Automatic load management keeps the home’s total draw in check, and the socketed design takes your own Type 2 cable, so a second car with a different cable is never a problem.

Every Volec Pulse comes with a free remote survey and panel check. The fitted price includes up to 15m of cable run from your consumer unit, a Type A RCBO protection device, an earth rod if one is needed, commissioning, app pairing and a walkthrough, plus DNO notification and a Building Regs compliance certificate. A typical install takes 3 to 4 hours, the unit ships in 3 to 5 days and it carries a 3 year warranty. You can see every detail on our Volec Pulse installation page. The manufacturer’s own details are on the Volec Pulse product page.

The Volec is not the pick if you want a cable permanently attached to the unit, since it is socketed. In that case, look at the tethered options below.

EVEC Home Charger: Best for Homes With Solar Panels

The EVEC Home Charger is a 7.4kW unit at £995 fully installed with a solar eco mode. That mode is the reason to buy it. It lets the charger run from surplus solar power so the car takes electricity your panels have already produced instead of drawing it from the grid.

Solar owners usually have a clear pattern. The panels produce most on sunny days, often while nobody is home, and the surplus goes back to the grid at a low export rate. Putting that energy into a car battery gives it more value than exporting it. The EVEC makes that easy without a separate controller.

If you are weighing up panels at the same time as a charger, it helps to understand how the two work together. Our page on the EVEC Home Charger lists its features and lets you request an install quote directly.

The EVEC is a sensible choice even without panels, since the 7.4kW output and smart features cover normal home use. Its solar eco mode is the feature that sets it apart for owners who want charging tied closely to their panels.

Ohme Home Pro: Best for Tariff Syncing and Future Capacity

The Ohme Home Pro costs £999 fully installed. Our listing describes it as 22kW capable, with dynamic load balancing, 4G and app control, and it works as a tariff-syncing smart charger. It is the most feature-rich of the three.

Dynamic load balancing is the feature that matters most here. A charger monitors how much power the rest of your house is using and adjusts its own draw so the total never trips your main fuse. If you run an electric oven, a heat pump or a shower at the same time as the car, the charger backs off briefly and then ramps up again. Load management protects the main fuse, and a house with a lot of electric appliances benefits most.

The 22kW figure needs context. A 22kW charger only delivers that speed on a three-phase supply and only to a car with an onboard charger that can accept it. Most UK homes run on single-phase power, where the charger will be limited to 7.4kW. The capability simply gives the Ohme room to grow if your supply changes. Our short guide on what to do when an EV charger is charging slowly explains how supply and car limits combine to set the real speed.

Choose the Ohme Home Pro if you are on a time-of-use tariff, you have a busy household electrical load or you want a 4G connection that does not depend on your home WiFi.

Comparison of Volec Pulse, EVEC and Ohme Home Pro

This table puts the three chargers next to each other using the details on our shop. Every unit is OZEV-approved, installed by our engineers and priced with standard installation included.

FeatureVolec PulseEVEC Home ChargerOhme Home Pro
Price fully installed (Nov 2026)£899£995£999
Power outputAdjustable, 16A to 48A7.4kW7.4kW on single-phase, listed as 22kW capable
ConnectorType 2, socketedType 2Type 2
ConnectivitySmart app controlSmart app control4G and app control
SolarSolar-aware chargingSolar eco modeWorks with tariff syncing
Load managementAutomatic load managementSmart schedulingDynamic load balancing
Weather ratingIP66See product pageSee product page
Best forMost homes, two-EV homes, solar, older panelsHomes that want a solar eco modeTime-of-use tariffs, busy home loads

The three are close in price. The £100 gap between the cheapest and the dearest is small next to the total cost of running an EV for several years, and the Volec Pulse is the cheapest of the three while also being the most adjustable, so it is the one to start with.

Tethered or Untethered: Which Cable Setup Is Better?

A tethered charger has a cable permanently attached to the unit, and an untethered one has a socket that takes your own cable. Tethered is more convenient for a single car, since you pull the cable out and plug in. Untethered suits multiple EVs, because each driver brings a cable that fits their own car and you avoid one long cable lying across the drive.

For a household with one EV, tethered is usually the better pick. There is nothing to carry, nothing to forget and nothing to leave in a boot. For a household that may buy a second EV, or whose two cars use different connectors, untethered gives more flexibility and also tidies the look of the wall. The Volec Pulse takes your own Type 2 cable, so it counts as untethered. Our guide to EV charging cables explained goes through cable types and lengths in more detail.

Cable length matters more than most buyers expect. The cable has to reach from the wallbox to the car’s charging port, and car ports sit in different places. Some are on the front wing, some on the rear. Measure the distance from where the charger will go to the port with the car parked in its normal spot, then add a little for slack.

How Much Does It Cost to Install a Home EV Charger?

A fully installed 7kW home charger typically costs between £800 and £1,200. Our fully installed home chargers start from £799, and every quote is a fixed price once we have surveyed the property, so the number we give you is the number you pay.

The charger itself is only part of the cost. Installation includes the cable run from the fuse board to the wall, the protective devices and the labour. The main factors that move the price are:

FactorEffect on cost
Distance from fuse board to chargerA short run is cheapest. Our guide suggests keeping the charger within 5 to 10 metres of the fuse board
Consumer unitIf the consumer unit needs replacing, that adds about £250 to £400
Supply typeA PME supply needs open-PEN protection, which adds a device to the install
Wall or surfaceBrick, render and cladding need different fixings and can add time
Charger choiceThe three chargers above sit between £899 and £999 including standard installation

If you want to understand each of these in detail, our EV charger installation cost page breaks it down. VAT treatment also affects the final figure, and our post on VAT on EV charger installation explains how it applies.

Does Your Home Need a Consumer Unit Upgrade?

Some homes do. A consumer unit, which is the fuse board, needs spare capacity and the right protective devices to take a new circuit for a charger. If yours is old, full or lacks the required protection, it needs replacing, and that adds about £250 to £400 to the job.

We check this during the survey, not on the day of the install. That is how we can give a fixed price up front. If the board is fine, it stays. If it needs work, you see that cost in the quote before anything starts.

Homes on a PME supply, which is the most common type in the UK, also need protection against an open PEN fault. This is a safety feature built into the installation, and a competent installer will include it as standard.

What Happens on Installation Day?

A typical home installation takes 2 to 4 hours. The engineer mounts the charger, runs the cable from the fuse board, fits the protective devices, tests the circuit and shows you how to use the app. You do not need to be an expert, and you do not need to buy anything separately.

The survey does the hard thinking beforehand, so by the time the engineer arrives the route, the wall position and the parts are already agreed. We turn most jobs around within 7 days of a confirmed booking. Our guide on who should fit your EV charger explains why this work belongs with a registered electrician, and every one of our engineers is NICEIC registered.

If you are wondering whether you could fit one yourself, our answer to can you install an EV charger yourself covers why that is a poor idea. A charger runs at high load for hours at a time, so the standard of the wiring matters far more than it does for a cooker or a shower.

Which Charger Suits a Terraced House or a Small Driveway?

Any of the three suits a terraced house, provided you can park off-street or close to the property. Terraced homes usually have a shorter distance from fuse board to front wall, so the cable run is simple, and the compact wallbox sits neatly beside the front door.

Where the car is parked a few metres from the house, the cable length between the wallbox and the car port becomes the practical limit. A tethered unit with a long cable can look untidy across a pavement, so many terraced owners choose untethered and carry a cable that suits the exact distance.

If you have no driveway at all, charging at home is harder. Our post on EV charging with no driveway in London covers the options available in that case.

Does Cold Weather Change Which Charger You Buy?

Cold weather slows charging, but it does not change which charger to buy. Batteries charge more slowly when they are cold, so a winter session can take longer than the same session in summer. A bigger charger will not fix that, because the limit sits inside the battery.

What helps in winter is scheduling. A smart charger can start a session so the car finishes just before you leave, which means the battery is warm from charging and ready to go. Our post on charging an EV at home in winter covers the practical side, including how range changes in the cold.

Can You Charge a Tesla at Home With These Chargers?

Yes. Tesla cars sold in the UK use the Type 2 connector, so a Type 2 home charger works with them. All three chargers above are Type 2. We also install the Tesla Wall Connector if you prefer the manufacturer’s own unit, which you can see on our Tesla Wall Connector page.

Running costs depend on your tariff. Our guide to the cost to charge a Tesla at home in the UK walks through typical figures, and the same logic applies to any other EV.

Other Chargers We Install

Beyond the three on this page, we install Zappi, Easee, Pod Point, Wallbox, Ohme, Andersen and the Tesla Wall Connector. All are Type 2. If you already have a charger in mind, we can fit it, and if you want an opinion, we can recommend one after the survey. Our Andersen Quartz page covers one of the premium options.

Swapping an old charger is also possible. If yours is outdated, damaged or in the wrong place, read about replacing or upgrading an old EV charger or moving an EV charger. Once a charger is in, a little care keeps it running well, and our guide to EV charger maintenance covers it.

How to Choose a Home EV Charger in Five Steps

  1. Check your parking. You need off-street parking or a space close enough for the cable to reach.
  2. Check your supply. Most homes are single-phase, which suits a 7.4kW charger.
  3. Check your car. Find out the maximum AC charging rate it accepts, since that sets the real speed.
  4. Check your tariff and your panels. A time-of-use tariff points to the Ohme, solar panels point to the Volec Pulse or the EVEC, and most other homes, including two-EV homes, point to the Volec Pulse.
  5. Book a survey. The survey confirms the cable route, the consumer unit and the final fixed price.

If you want to talk it through first, our home EV charger installation page explains the full process, and you can reach us on 0203 0519196.

Quick Answers

Best Home EV Chargers UK: FAQs

The Volec Pulse at £899 is our top pick for most homes, because its power adjusts from 16A to 48A to suit your panel and it is rated IP66 for outdoor use. The EVEC Home Charger at £995 suits owners who want a solar eco mode, and the Ohme Home Pro at £999 suits tariff syncing. Prices are as of November 2026 and include standard installation.

A typical 7kW home installation costs between £800 and £1,200. Our fully installed home chargers start from £799, and the quote is a fixed price after the survey. A consumer unit upgrade, if needed, adds about £250 to £400.

A 7kW charger is better for nearly every UK home. A 22kW charger needs a three-phase supply, which most houses do not have, and your car must be able to accept that rate. If your car takes only 3.6kW, a bigger wallbox will not speed charging up.

A 7kW charger adds about 25 to 30 miles of range per hour. A full overnight charge usually takes 6 to 8 hours. That is far faster than a 3-pin socket, which delivers about 2.3kW.

Yes, because smart charge point regulations apply to all new chargers. A smart charger lets you schedule sessions from an app and charge when your electricity is cheapest. Tariff-syncing models go further and choose the cheap window for you.

The Volec Pulse and the EVEC Home Charger both suit solar homes. The Volec watches your solar production so more of the charge comes from sunlight, and the EVEC has a solar eco mode that charges from surplus generation. The Volec is cheaper at £899, and it also lets you set the power to what your panel can spare.

Tethered is more convenient for a single car, since the cable stays attached. Untethered suits multiple EVs, because each driver can use a cable that fits their car, and the Volec Pulse is socketed for that reason. Check where your car’s charging port sits before you decide on cable length.

A typical home installation takes 2 to 4 hours. We survey the property first, so the route and parts are agreed before the engineer arrives. We turn most jobs around within 7 days.

Only if your current one lacks spare capacity or the right protection. We check during the survey and tell you before the install, and a replacement adds about £250 to £400. Homes on a PME supply also need open-PEN protection.

Yes. Cold batteries charge more slowly, so winter sessions can take longer. A bigger charger will not change that, but scheduling the charge to finish just before you leave helps.

Yes, the three chargers on this page are OZEV-approved and fitted by our in-house engineers. Our engineers are NICEIC registered, and all our chargers use the Type 2 connector.

We install Zappi, Easee, Pod Point, Wallbox, Ohme, Andersen and the Tesla Wall Connector. Get in touch with the model you have and we will confirm the details. Quotes are fixed price after a survey.

Get a Fixed-Price Quote for Your Home

Tell us your postcode, your car and where you park, and we will recommend the right charger and give you a fixed price after a survey. Call us on 0203 0519196 or request a free quote. We cover London, the Home Counties and Yorkshire.

Leave a Reply

Your email address will not be published. Required fields are marked *

EV Install Pro provides professional EV charger installation services for homes and businesses across London and the South East. 

Work Hours

© 2026 EV Install Pro. All Rights Reserved.