You had your charger fitted, and for a while it was perfect. Then something changed. You bought a different car with the charging port on the other side. You rearranged the drive. You got a second EV and need a space for it. Or you simply realised the wall it’s on is where the bins end up every Tuesday.
So the question comes up: can you move an EV charger to a new spot on your property?
Yes, in almost every case you can. But it isn’t a matter of unscrewing it and bolting it somewhere else. A charger sits on a dedicated circuit, protected and certified when it was first installed, and moving it changes that circuit. That’s work for a qualified electrician, not a weekend DIY job.
Here’s what moving a charger really involves, what affects the cost and the timing, and how to get it right the first time.
Can You Move an EV Charger?
Technically, yes. A wall-mounted home charger isn’t fixed in place forever. Plenty of people relocate theirs, whether they’re rearranging a driveway, building an extension, switching cars or moving house.
What matters is how you go about it. A charger isn’t a plug-in appliance. It’s wired into your home’s electrics, usually through a dedicated cable back to the consumer unit, with protective devices along the way. Changing where it sits means changing that cable run, and any change to a certified electrical installation needs to be done and signed off properly.
So the honest answer is: yes, it can be moved, but it should be moved by a qualified electrician who can test and certify the new setup. We’ll explain why that matters in a moment.
Why People Move an EV Charger
The reasons vary, and some are more common than you’d think.
A new car. The charging port isn’t in the same place on every vehicle. Some sit at the front, some at the rear, some on the driver’s side and some on the passenger’s. A charger that suited your old car may leave your new one awkwardly far from the socket. Our guide on Type 1 vs Type 2 EV chargers and our piece on EV charging cables explained are useful if the new car also brings a different plug.
A second electric vehicle. One charger often needs to serve two cars, or you want a second unit. The original position may not suit both.
Rearranging the drive or garden. New paving, a driveway extension, a garage conversion, a new fence or a loft or rear extension can all make the old spot awkward.
Poor original placement. Sometimes the charger was put in the easiest place for installation rather than the best place for daily use. Cables stretch across paths, trip people or hang across a pavement.
Weather exposure. A spot that takes the worst of the rain, wind or sun might be worth swapping for somewhere more sheltered.
Better Wi-Fi signal. Smart chargers need a connection. If yours keeps dropping offline, a position closer to the router can help.
Moving house. Many people want to take their charger with them, and that’s often possible.
Safety or access concerns. A charger in a shared passage, near a gate or in a spot where children play might not be ideal long term.
Planning for the future. Adding solar, a battery or a heat pump sometimes changes where it makes sense to put things.
What Does Moving a Charger Actually Involve?
Moving it sounds simple, but a proper relocation has several steps.
1. A site check. An electrician looks at where the charger is now, where you want it, and what lies between. That includes the route back to the consumer unit, the type of wall or surface, any obstacles and the weather exposure of the new spot.
2. Checking the existing circuit. The cable that feeds the charger was chosen for its length, the supply and the protective devices. If the new position is much further away, the cable may need upgrading, because longer runs can cause voltage drop and affect performance. Our guide on preparing your home’s electrical system for EV charger installation explains what’s checked.
3. Isolating the supply. The circuit is switched off at the consumer unit before anything is touched. This is the point where the job stops being suitable for anyone who isn’t qualified.
4. Removing the charger. The unit is safely disconnected and taken off its mounting. Any holes or fixings left behind are dealt with.
5. Running new cable. Depending on the new location, that might mean extending the existing run, replacing it with a new cable, or routing it through walls, conduit or underground ducting. Where the cable passes through the outside of the building, it needs proper protection from damage and weather.
6. Fitting at the new position. The charger is mounted securely, connected and checked.
7. Testing and certification. The new arrangement is tested, including earthing, protective devices and polarity. The electrician then issues the appropriate certification for the work.
8. Setting up and handover. The charger is powered up, any app or schedule is reconnected, and a test charge confirms everything works.
9. Making good. Old holes are filled, and the old position is tidied up so there’s no sign of the previous installation.
Why You Shouldn’t Move It Yourself
It’s tempting, especially if the charger looks like it’s just fixed to a wall. But please don’t. Here’s why.
It’s mains electrical work. A charger carries a lot of power for a long time, more than most household appliances. Mistakes in wiring, connections or protection can cause overheating and fire. Our guide on EV charger installation and fire risk explains why the standards are so strict.
It’s notifiable work. EV charger installation falls under rules that require competent, registered installers and proper certification. Our guide on EV charger installation regulations and permits in the UK explains what’s required, and our piece on whether you can install an EV charger yourself covers the “can I do it myself?” question in detail.
It can affect your warranty. Manufacturers often require installation and relocation by a qualified person. Moving the unit yourself can void the warranty.
It can affect your insurance. An uncertified change to your electrics can cause trouble if you ever need to claim. Our guide on whether an EV charger affects home insurance explains what to check.
It can affect resale. Buyers’ solicitors often ask for electrical certificates. A charger moved without certification is a problem waiting to happen.
It can make the unit unsafe. Protection devices, earthing arrangements and cable ratings are all specific to the installation. A move that ignores them can leave the charger without proper protection.
If you’re ever unsure about who’s suitable, our guide on how to find a certified EV charger installer explains what credentials to look for, and our comparison of British Gas, Octopus and independent installers helps you weigh up your options.
What Affects the Cost and Time of Moving a Charger?
We’d rather explain what drives the price than quote a number that won’t match your home. Costs vary widely, and these are the main factors.
Distance. Moving a charger a metre along the same wall is a very different job from relocating it to the other side of the house. More distance means more cable, more fixings and more labour.
Route. A straight run along an exterior wall is simple. A route through a garage, through internal walls, under a path or across a lawn takes more work.
Cable condition and rating. The existing cable might be reusable, or it might not be long enough or suitable for the new run. If a longer or heavier cable is needed, that adds cost.
Underground ducting. Taking power to a post or an outbuilding often means digging a trench, laying armoured cable or ducting, and reinstating the ground. It’s one of the bigger variables.
Surface and mounting. Brick, render, cladding, timber and block walls all need different fixings. Posts need foundations.
Access and obstructions. Tight spaces, scaffolding, roof overhangs or awkward corners add time.
Consumer unit capacity. If the unit is already near capacity, or the protection arrangement needs updating, extra work might be needed. Our guide on whether you need a new consumer unit for an EV charger explains when that’s the case.
Supply and load. If you’ve added solar, a battery, a heat pump or a second charger since the first installation, your electrician may recommend load management. See our guides on load balancing for EV chargers and single-phase vs three-phase supply.
Making good. Repairing and decorating the old position adds a bit of time and cost.
The charger itself. If you’re moving and upgrading at the same time, the new unit is an extra cost. Our chargers page shows the options, including the EVEC home charger, the Ohme Home Pro and the Volec Pulse.
For the bigger picture on pricing, see our guides on how much EV charger installation costs in the UK and labour costs, and our EV charger installation cost page. For timing, our guide on how long EV charger installation takes gives a realistic idea, and relocation is usually quicker than a first-time installation, though it depends on the route.
How to Choose the Best New Spot
If you’re going to move it, you might as well get the new position right. These are the things we think about.
Where’s the charging port? Park the car where you normally park it and look at where the port sits. The charger should be close enough that the cable reaches comfortably, without stretching across a path.
Will it work for every car you might own? If you might change vehicles, or have two, a position that suits different port locations is worth thinking about. Our guide on tethered vs untethered chargers explains how cable choices affect flexibility.
Is it sheltered? Chargers are weatherproof, but a bit of cover from the worst of the rain and sun is kind to the unit. Our guide on charging an EV at home in winter covers cold-weather considerations.
Is it close to the consumer unit? A shorter cable run is cheaper, simpler and gives less voltage drop. A very long run isn’t impossible, but it adds cost.
Is the wall suitable? Solid brick or block is straightforward. Thin cladding, old render or timber might need a mounting board or a post.
Is there Wi-Fi? For smart chargers, check your signal at the new spot. A weak connection leads to missed schedules and annoying error messages. Our guide on smart EV chargers and V2G explains why it matters.
Is it safe and out of the way? Keep it away from places where people will trip over the cable or where it could be hit by a car, a bike or a bin.
Will it block anything? Gates, windows, doors, meters and access routes should stay clear.
Is it visible from the street? This can matter for planning and for security. We’ll cover planning in a moment.
What about the future? If you’re planning solar, a battery or a second charger, now is a good time to think about it. Our guide to solar-powered EV charging explains how it fits together.
Do You Need Planning Permission to Move a Charger?
Often not, but it depends on where the new position is and what kind of property you have.
In many cases, installing a charger falls under permitted development rights, which means you don’t need to apply to the council. But there are exceptions, and a new location can trigger them when the old one didn’t.
Listed buildings usually need consent for external alterations.
Conservation areas can bring extra restrictions, especially if the charger would be visible from the road.
Flats and leasehold properties generally need permission from the freeholder or management company.
Positions facing a highway can have limits on height and projection in some circumstances.
Chargers on posts sometimes have their own rules, depending on height and where they stand.
So even if your original installation didn’t need permission, check before you move it. Our guide on EV charger installation regulations and permits in the UK explains the main points. If you live in a flat, our guides on EV charger installation in flats and rented properties and apartment blocks and shared car parks explain the extra steps.
Moving Your Charger When You Move House
This is one of the most common reasons for relocation, and the answer is usually yes, you can take it with you.
A few things to think about.
Is the charger part of the sale? If it’s a fixture, it may be included unless you say otherwise. Make sure you agree this clearly with the buyer, in writing, before exchange.
Will it suit the new home? Check the supply, the consumer unit and the parking position at the new property. Our guides on single-phase vs three-phase supply and EV charging without a driveway in London are helpful.
Does it still work with your tariff? If you’re moving to a new energy contract or meter set-up, see our guide on installing an EV charger with an Economy 7 meter.
Is it worth moving? Sometimes it’s cheaper and simpler to leave the old charger and fit a new one. That depends on the age of the unit, the new property and your plans.
Who removes it? Have it removed by a qualified electrician, who can leave the old installation safe and certified.
Who refits it? The new installation should be tested and certified like any other.
What If You Rent or Live in a Shared Building?
Then you probably need permission before moving anything. If the charger was installed with a landlord’s or freeholder’s approval, moving it may need that approval again.
Shared supplies, communal parking and landlord rules make relocation more complicated, and sometimes impossible. Our guides on EV charger installation in terraced houses, flats and rented properties and apartment blocks and shared car parks explain what’s usually involved.
What About Workplace and Commercial Chargers?
Moving a commercial charger brings extra considerations: shared supplies, multiple units, load management, signage, accessibility and parking layouts. If your site is changing, it’s worth planning the move as part of a wider review. Our pages on workplace EV charger installation and commercial EV charger installation in London explain how we plan these projects, our commercial EV charger installation guide goes deeper, and our guide on EV charging for employees and workplace rules covers the policy side. For the financial angle, see tax relief for UK businesses and VAT on EV charger installation.
Should You Move It, or Replace It?
Sometimes the better question is whether to move the existing charger at all.
Moving makes sense if:
- The unit is relatively new and working well.
- The new position is reasonably close to the old one.
- You’re happy with its features and speed.
- You’d like to keep the investment you’ve already made.
Replacing might make more sense if:
- The charger is older and lacks smart features or modern safety standards.
- It’s a slow unit, and you’d benefit from an upgrade. Our comparison of 3kW vs 7kW vs 22kW home EV chargers explains what the differences mean.
- It’s been playing up. Our guides on what to do when an EV charger isn’t working and why your charger is charging slowly help you work out whether the problem is the unit or the installation.
- You’re relying on a slow cable setup. Our guides on what a granny charger is and what a granny EV charger is explain why a dedicated unit is usually better.
- You want to add smart scheduling, load management or solar integration.
An electrician can tell you whether your existing charger is worth relocating. We’d always rather give an honest opinion than sell you a new unit you don’t need.
Will Moving It Affect Your Warranty or Certification?
It can, which is another reason to do it properly.
Warranty. Many manufacturers require a qualified person to install and relocate the unit. Check your warranty terms, and tell your installer.
Certification. Your original installation came with certification. A move should come with new certification covering the change. Keep both documents together.
Network operator notification. Depending on your supply and charger, your local network operator may need to be informed. A competent installer handles this for you.
Insurance. Tell your insurer if the installation has changed significantly, and keep your certificates safe.
Maintenance. After a move, it’s a good time to check the unit. Our guide on whether a home EV charger needs servicing or maintenance explains what to look for.
A Quick Checklist Before You Book
If you’re thinking of moving your charger, it helps to know the answers to these first.
- Where is the charger now, and where do you want it?
- What car (or cars) will use it, and where are the charging ports?
- Is your property a house, a flat, a rental or a listed building?
- Is the charger tethered or untethered?
- How old is the unit, and is it under warranty?
- Do you have the original installation certificate?
- Have you added solar, a battery or a heat pump since it was installed?
- Do you have Wi-Fi at the new spot?
- Is anyone else’s permission needed?
- Are you moving house, or staying put?
Having these ready makes the quote faster and more accurate. If you’re not sure about any of them, we can work them out together during a survey.
More Guides That Might Help
If you’re thinking about your charger setup more broadly, these guides cover related ground: how to charge an electric car at home, how EV chargers work, types of EV charging explained, the 80% EV charging rule, how much it costs to charge an electric car at home, what it costs to charge a Tesla at home, whether a home EV charger is worth it and whether a wallbox is worth it for a plug-in hybrid. If you’re moving into a new property, see our guide to EV charger installation for new-build homes and developers. If you’re curious about help with costs, see our grants page, our guide to EV charger installation grants in the UK and our piece on whether a free EV charger in the UK is realistic. And if you’re still deciding what to drive, our guide on what a self-charging hybrid car is clears up a common mix-up.
You can see everything we offer on our services page, find answers on our FAQs page, and learn more about us on our about page. Our blog has plenty more guides like this one, and our home EV charger installation page explains how we approach every job.
Areas We Cover
We install, move and support home EV chargers across London and the surrounding area, so if you’re near one of the places below, your local page has more detail.
In north and north-west London, we cover Barnet, Brent, Ealing, Harrow, Hillingdon and Hounslow. Further north and across the north-east, there’s Enfield, Haringey, Camden, Islington and Hackney.
In central London, we work across Westminster, Kensington and Chelsea, Hammersmith and Fulham, Lambeth, Southwark and Tower Hamlets, where tight parking and shared supplies often make careful positioning especially important.
In south and south-west London, we cover Croydon, Sutton, Merton, Wandsworth, Kingston upon Thames, Richmond upon Thames and Bromley. In south-east London, there’s Lewisham, Greenwich and Bexley.
Across east London, we cover Waltham Forest, Redbridge, Newham, Barking and Dagenham and Havering. And just outside the capital, we also cover Watford.
London’s tight driveways, shared supplies and changing parking arrangements mean relocations are a regular part of our work. If your area isn’t named above, our full locations page has the complete list.
Moving a Home EV Charger: FAQs
Can I move my EV charger to a different spot on my property?
Yes, in most cases. It needs to be done by a qualified electrician, who will reroute or extend the circuit, test the new arrangement and issue the right certification.
Can I move the charger myself?
No. A charger is wired into a dedicated circuit with protective devices, and moving it is notifiable electrical work. Doing it yourself is unsafe and can affect your warranty and insurance.
How much does it cost to move an EV charger?
It depends on the distance, route, cable needed, surface and any supply work. We assess the job first and quote before starting.
How long does it take?
A simple move along the same wall can be quick. Longer routes, trenching or extra supply work take longer. Your electrician can give a realistic estimate after a survey.
Do I need planning permission to move it?
Often not, but listed buildings, conservation areas, flats and some positions facing a highway can have restrictions. It’s worth checking before you move it.
Can I take my charger with me when I move house?
Usually, yes, but agree it clearly in the sale, and have it removed and refitted by a qualified electrician.
Will moving it affect my warranty?
It can if it isn’t done by a qualified person. Check your warranty terms and tell your installer.
Do I need new certification after moving it?
Yes. The new arrangement should be tested and certified, and you should keep the paperwork.
Can I move a charger further away from the house?
Yes, but longer runs need suitable cable, protection and sometimes underground ducting, which adds cost.
Should I move my old charger or buy a new one?
It depends on its age, features and condition. A newer, well-working unit is usually worth moving. An older or faulty one may be better replaced.
Do I need landlord permission if I rent?
Usually, yes. Check your tenancy agreement and speak to your landlord or managing agent first.
Will moving it affect my home insurance?
A properly certified move shouldn’t cause problems, but it’s sensible to tell your insurer and keep your certificates safe.
Move It Once, Move It Right
Relocating a charger isn’t complicated when it’s done properly. It just needs the right person, the right checks and the right paperwork, so you end up with a setup that’s safe, certified and actually convenient.
If you’d like to move your charger, or you’re not sure whether it’s worth it, get in touch through our contact page or request a quote, and we’ll survey your property, explain the options and recommend the best spot for the way you live.


[…] for relocation or expansion. Sites change. Our guide on moving an EV charger explains what’s involved if layouts shift […]